7718-12-250 - Oak Polyamide Glue Sticks - 12mm
TecBond 7718-12-250 Oak polyamide glue stick. Available in 10 stick pack or 5KG box.
Short open time and low viscosity make it ideal for potting and encapsulation on electrical components. Also ideal for knot filling and wood repair
- Hard setting with low shrinkage.
- Can be easily trimmed with a chisel or knife.
- Main uses are electrical and timber industry.
- Suitable for use in a food environment. (FDA Approved)
Tecbond 7718 has been tested and complies with UL 94-V0 The Standard for Safety of Flammability of Plastic Materials for Parts in Devices and Appliances testing.
|Chemical Type:||Polyamide glue stick|
|Diameter:||12mm / 1/2"|
|Length:||250mm / 10"|
Please note: Tecbond 7718 is a polyamide based product and will consequently absorb small amounts of moisture from the atmosphere. This does not effect the performance of the adhesive, however, even a small amount of moisture contamination will turn into a large amount of steam at glue gun temperature. This will cause the glue gun to drip, foam and the glue stick to back up. Please keep the adhesive sealed in the special packs provided. Moisture contaminated adhesive may be dried in an oven at 70c for 24-48 hours.
|Stick Size||12mm Glue Sticks|